Elk Grove Village is one of the largest industrial and office parks in the region, and the heating work here splits along a line most HVAC pages ignore: a furnace in a 1960s ranch and a rooftop unit serving a warehouse office block are not variations of the same job. They are different trades with different permits, and the Village treats them that way. We do both.

Two Kinds of Building, Two Sets of Rules
The Village publishes separate residential and business permit checklists, and its guidance is explicit that zoning and occupancy approval is required for all commercial and industrial occupancies. That is not red tape for its own sake — it is the Village confirming in writing that the use you intend for a building is permitted there, which matters in a village built around a business park.
The house
A furnace, a thermostat, a set of ducts. The questions are whether the work needs a permit, who is doing it, and whether the equipment is safe. Straightforward, and the same as anywhere else in DuPage County.
The office suite above the warehouse
Split systems and packaged units serving occupied space, with zoning and occupancy questions layered on top of the mechanical work. If a tenant fit-out changes the load, the mechanical side is not the only thing that changes.
The warehouse floor
High-bay heating — unit heaters or radiant — where the complaint is usually “the office is warm and the floor is freezing”. Stratification is a design problem before it is an equipment problem.
The rooftop unit
Packaged equipment on a curb, with economisers, filters nobody changes, and access that requires a ladder and a roof hatch. It fails in the same ways as a furnace and is maintained far less often.
Why Commercial Failures Cost More Than the Repair
A house losing heat is uncomfortable. A business losing heat closes, sends staff home, or keeps them working in coats. The economics of downtime make the case for looking at a commercial system before it fails rather than after — and the same 218-review standard of honesty applies: we would rather tell you a unit is fine than sell you a contract you do not need.
For homes, the arithmetic is familiar: repair against replacement, parts availability, heat-exchanger condition. For commercial space, add downtime and tenant obligations to the same list. Either way you get both numbers and the reasoning behind them.
What the Diagnostic Covers
For a residential furnace the visit is $89–$125, quoted before we arrive: ignition and flame proving, gas pressure, temperature rise and static pressure, venting and condensate, and a heat-exchanger inspection. Repair pricing follows the diagnosis, labour carries a one-year warranty, and parts carry the manufacturer’s. Replacement estimates are free, with financing available for residential work. Commercial quotes are scoped per building rather than priced from a list, because a rooftop unit and an office split are not comparable jobs.
Emergency Calls, Residential and Commercial
We answer around the clock, every day. For a house, tell us at the start if the building is already cold or if there are children, older residents or anyone with a health condition in it. For a commercial site, tell us what the space is used for and whether it can stay closed — that decides whether it is an emergency or a Monday appointment.
ARIA holds 5.0 stars across 218 Google reviews and a BBB A+ rating. Read the reviews before you call.
Brands, Refrigerants, and Equipment We Did Not Install
We service every major furnace brand and we are a Rheem dealer. On the cooling side we handle A2L refrigerants (R-454B and R-32) and older R-410A systems under EPA Section 608 certification. Packaged rooftops, split systems and residential furnaces are all part of the same week for us — and most of the equipment we see was installed by someone else.

Elk Grove Village Questions
Does commercial heating work need more than a permit?
Yes. Elk Grove Village requires zoning and occupancy approval for all commercial and industrial occupancies in addition to the permit, and residential and business projects have separate checklists. The Community Development Department on (847) 357-4220 confirms what a specific building needs.
Do you work on rooftop packaged units?
Yes — packaged rooftops and split systems serving office and light industrial space, alongside residential furnaces. Commercial work is scoped per building and the permit and occupancy requirements differ from a house.
My warehouse floor is cold and the office is warm. What causes that?
Stratification: warm air rises to the high ceiling while the occupied floor stays cold. It is usually a design and distribution problem rather than a worn-out heater, and the fix may be destratification or a change to how the unit heaters are controlled.
What does the residential diagnostic include?
Ignition and flame proving, gas pressure, temperature rise and static pressure, venting and condensate, plus a heat-exchanger check.
Can you service a building outside normal hours?
Overnight and weekend calls are answered. For commercial sites we plan around when the building can be without heat, which is often outside business hours.
Is a 20-year-old furnace worth repairing?
If the heat exchanger is sound and the part is available, often yes. If it is cracked, no — that is a safety answer, not a sales one.
“I continue to employ ARIA for my HVAC Work simply because they always as youd expect. Always very knowledgable professional respectful polite. Highly recommended”
Warren
Book a Furnace Repair in Elk Grove Village
Call 630-433-0339 or use the contact form. For a house, have the model number and age to hand. For a commercial building, tell us the equipment type and what the space is used for — it is the fastest way to a sensible quote. Outside the village, the service area page lists the towns we cover.